Polymers
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Bilayer Scaffold for Corneal Stromal Engineering: Solvent-Cast Polyvinyl Alcohol/Sodium Alginate and Electrospun Aligned Polycaprolactone Fibers.
18.
2026
-
Electrospun PLA/PCL Membranes for Sustained Transdermal Rifampicin Delivery: Biocompatibility, Stability, and Antimycobacterial Activity.
18.
2026
-
Enhancing Energy Absorption in PLA Prints Through Post-Thermal Treatment.
18.
2026
-
Electrospun Polycaprolactone/Carbon Nanotube Membranes for Transdermal Drug Delivery Systems.
18.
2026
-
The Effect of Humidity and UV Light Exposure on the Mechanical Properties of PA6 Matrix Reinforced with Short Carbon Fibers and Built by Additive Manufacturing.
18.
2026
-
Step-by-Step Analysis of a Copper-Mediated Surface-Initiated Atom-Transfer Radical Polymerization Process for Polyacrylamide Brush Synthesis Through Infrared Spectroscopy and Contact Angle Measurements.
17.
2025
-
Antibacterial Crosslinker for Ternary PCL-Reinforced Hydrogels Based on Chitosan, Polyvinyl Alcohol, and Gelatin for Tissue Engineering.
17.
2025
-
Modulated Degradation of Polylactic Acid Electrospun Coating on WE43 Stents.
17.
2025
-
Tribological Performance of High-Density Polyethylene (HDPE) and Recycled Polyvinyl Butyral (PVB) Blends During Pin-on-Disk Tests.
17.
2025
-
Study of the Influence of Chitosan-Wrapped Carbon Nanotubes on Biopolymer Film Properties.
17.
2025
-
Enhanced Lightweight Structures Through Brachistochrone-Inspired Lattice Design.
17.
2025
-
Recent Advances in the Analysis of Functional and Structural Polymer Composites for Wind Turbines.
17.
2025
-
Environmentally Sustainable and Green Polymeric Method for Chitosan (CH) Film Synthesis Using Natural Acids and Impact of Zinc Ferrite Nanoparticles (NPs) on Water Solubility (WS) and Physical Properties.
16.
2024
-
Green Chemically Synthesized Iron Oxide Nanoparticles¿Chitosan Coatings for Enhancing Strawberry Shelf-Life.
16.
2024
-
Influence of Chitosan Purification on the Immunomodulator Potential of Chitosan Nanoparticles on Human Monocytes.
16.
2024
-
The Impact of Nickel¿Zinc Ferrite Nanoparticles on the Mechanical and Barrier Properties of Green-Synthesized Chitosan Films Produced Using Natural Juices.
16.
2024
-
Functional UV Blocking and Superhydrophobic Coatings Based on Functionalized CeO2 and Al2O3 Nanoparticles in a Polyurethane Nanocomposite.
16.
2024
-
Influence of Reduced Graphene Oxide and Carbon Nanotubes on the Structural, Electrical, and Photoluminescent Properties of Chitosan Films.
16.
2024
-
Nanofibrous ¿-Polycaprolactone Matrices Containing Nano-Hydroxyapatite and Humulus lupulus L. Extract: Physicochemical and Biological Characterization for Oral Applications.
16.
2024
-
Hydrogel Based on Chitosan/Gelatin/Poly(Vinyl Alcohol) for In Vitro Human Auricular Chondrocyte Culture.
16.
2024
-
A Study of PLA Thin Film on SS 316L Coronary Stents Using a Dip Coating Technique.
16.
2024
-
Enhancing Pectin Particles with Polymer Additives: Mitigating Rumen Degradation and Minimizing Yellowish Milk Color in Grazed Cows.
16.
2024
-
Simulation of a Composite with a Polyhydroxybutyrate (PHB) Matrix Reinforced with Cylindrical Inclusions: Prediction of Mechanical Properties.
15.
2023
-
Magnetic and Viscoelastic Response of Magnetorheological Elastomers Based on a Combination of Iron Nano- and Microparticles.
15.
2023
-
Modeling the Ultrasonic Micro-Injection Molding Process Using the Buckingham Pi Theorem.
15.
2023
-
ß-Phase Enhancement of Force Spun Composite Nanofibers for Sensing Applications.
15.
2023
-
Advances in Material Modification with Smart Functional Polymers for Combating Biofilms in Biomedical Applications.
15.
2023
-
Chitosan: Properties and Its Application in Agriculture in Context of Molecular Weight.
15.
2023
-
Polypropylene-Based Polymer Locking Ligation System Manufacturing by the Ultrasonic Micromolding Process.
15.
2023
-
Effect of Recycled Polyvinyl Butyral (rPVB) Addition on the Tribological Performance of Glass¿Fiber Reinforced Polyamide (PAGF) during Reciprocating Sliding Wear Conditions.
15.
2023
-
Sputtering Plasma Effect on Zinc Oxide Thin Films Produced on Photopolymer Substrates.
15.
2023
-
Experimental Analysis of Fiber Reinforcement Rings¿ Effect on Tensile and Flexural Properties of Onyx¿¿Kevlar® Composites Manufactured by Continuous Fiber Reinforcement.
15.
2023
-
Dynamic Fracture Resistance under Plane Strain Conditions of High-Density Polyethylene Nanoclay Composites.
15.
2023
-
Biopolymeric Fibrous Aerogels: The Sustainable Alternative for Water Remediation.
15.
2023
-
Effect of Single-Walled Carbon Nanotubes on the Cross-Linking Process in Natural Rubber Vulcanization.
15.
2023
-
Predictive Modeling of Soft Stretchable Nanocomposites Using Recurrent Neural Networks.
14.
2022
-
Synthesis of Biobased Hydroxyl-Terminated Oligomers by Metathesis Degradation of Industrial Rubbers SBS and PB: Tailor-Made Unsaturated Diols and Polyols.
14.
2022
-
Evaluation of the Orthotropic Behavior in an Auxetic Structure Based on a Novel Design Parameter of a Square Cell with Re-Entrant Struts.
14.
2022
-
Customizable Collagen Vitrigel Membranes and Preliminary Results in Corneal Engineering.
14.
2022
-
Estimation of the Effects of CO2 and Temperature on the Swelling of PS-CO2 Mixtures at Supercritical Conditions on Rheological Testing.
14.
2022
-
Engineering, Recyclable, and Biodegradable Plastics in the Automotive Industry: A Review.
14.
2022
-
Novel Magnetic Polymeric Filters with Laccase-Based Nanoparticles for Improving Congo Red Decolorization in Bioreactors.
14.
2022
-
Characterization of Viscoelastic Poisson¿s Ratio of Engineering Elastomers via DIC-Based Creep Testing.
14.
2022
-
Soft Tissue Hybrid Model for Real-Time Simulations.
14.
2022
-
Biopackaging Potential Alternatives: Bioplastic Composites of Polyhydroxyalkanoates and Vegetal Fibers.
14.
2022
-
Influence of Epoxy Resin Curing Kinetics on the Mechanical Properties of Carbon Fiber Composites.
14.
2022
-
Partially Deacetylated and Fibrillated Shrimp Waste-Derived Chitin as Biopolymer Emulsifier for Green Cutting Fluids¿Towards a Cleaner Production.
14.
2022
-
A Meta-Analysis of Wearable Contact Lenses for Medical Applications: Role of Electrospun Fiber for Drug Delivery.
14.
2022
-
Effective Stiffness of Fused Deposition Modeling Infill Lattice Patterns Made of PLA-Wood Material.
14.
2022
-
Insights on the molecular behavior of polypropylene in the process of ultrasonic injection molding.
13.
2021
-
Relaxation phenomena in chitosan-au nanoparticle thin films.
13.
2021
-
Evaluation of the physicochemical properties of chitosans in inducing the defense response of coffea arabica against the fungus hemileia vastatrix.
13.
2021
-
Load distribution on pet-g 3d prints of honeycomb cellular structures under compression load.
13.
2021
-
Influence of the epoxy resin process parameters on the mechanical properties of produced bidirectional [±45¿] carbon/epoxy woven composites.
13.
2021
-
Triborheological study under physiological conditions of PVA hydrogel/Ha lubricant as synthetic system for soft tissue replacement.
13:1-15.
2021
-
Investigation of the mechanical properties of parts fabricated with ultrasonic micro injection moldingprocess using polypropylene recycled material.
12.
2020
-
PH-sensitive starch-based hydrogels: Synthesis and effect of molecular components on drug release behavior.
12:1-14.
2020
-
Enhanced catalytic dye decolorization by microencapsulation of laccase from P. Sanguineus CS43 in natural and synthetic polymers.
12:1353.
2020
-
Tailoring the diameters of electro-mechanically spun fibers by controlling their Deborah numbers.
12.
2020
-
Fabrication and characterization of a low-cost microfluidic system for the manufacture of alginate-lacasse microcapsules.
12.
2020
-
Advances in the processing of UHMWPE-TiO2 to manufacture medical prostheses via SPIF.
11.
2019
-
Development, fabrication, and characterization of composite polycaprolactone membranes reinforced with TiO2 nanoparticles.
11.
2019
-
Investigation of the effect of carbonyl iron micro-Particles on the mechanical and rheological properties of isotropic and anisotropic MREs: Constitutive magneto-mechanical material model.
11.
2019
-
Ultrasonic molding technology: Recent advances and potential applications in the medical industry.
11.
2019
-
Alginate/gelatin hydrogels reinforced with TiO2 and ß-TCP fabricated by microextrusion-based printing for tissue regeneration.
11.
2019
-
Fabrication and characterization of isotropic and anisotropic magnetorheological elastomers, based on silicone rubber and carbonyl iron microparticles.
10.
2018
-
Single-point incremental forming of two biocompatible polymers: An insight into their thermal and structural properties.
10.
2018
-
Experimental investigation of the magnetorheological behavior of PDMS elastomer reinforced with iron micro/nanoparticles.
9.
2017
Identity
International Standard Serial Number (ISSN)