abstract
- This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/This paper proposes using a frequency-locked loop-based detector to estimate rotational speed and angle position for an electric machine rotor shaft. The measurement system consists of arrays of permanent magnets fixed to the rotor shaft together with linear Hall-effect sensors attached to a fixed frame. Parametric uncertainties on the sensor assembly lead to significantly noisy signals, exhibiting unbalance and harmonic distortion. To accurately estimate rotational speed and angle, it is proposed to use a frequency-locked loop scheme based on a fourth-order harmonic oscillator (FOHO) to allow the processing of the symmetric components, thus dealing with the unbalance. The scheme also includes an adaptive law to reconstruct the fundamental frequency. Moreover, a harmonic compensation mechanism comprising parallel FOHOs is included; each FOHO is tuned at the spectral component under concern for its cancellation. The proposed algorithm delivers a clean estimate of the positive sequence fundamental component despite the disturbances at the signals provided by the Hall-effect sensor, which is used to reconstruct the rotation angle. The described approach could enhance low-cost sensing solutions in applications where position feedback is mandatory and sensorless control is impossible, not requiring special installation considerations.